| Mac
Dialup Networking Setup |
Instructions Below (step by step) |
 |
Step
1.
Click on your Mac Hard Drive. |
 |
Step
2.
Click on the Mac Assistants folder. |
 |
Step
3.
Click on the Internet Setup Assistant. |
 |
Step
4.
Internet Setup Assistant appears. Simply click
Yes to continue... |
 |
Step
5.
The next screen will ask if you already have an
Internet account; click Yes to continue... |
 |
Step
6.
This screen asks you if you have the information
needed to set up your account. Click the arrow
in the bottom right to move on to the next
step...
Note that for a typical dialup account, it is
not necessary for you to know the DNS server nor
the IP address as these will be setup to be
“server assigned” later in the configuration
process. |
 |
Step
7.
This screen will ask for what name you would
like to call your connection, enter AITAccess,
and then select Modem and click the arrow to
continue... |
 |
Step
8.
The Macintosh OS usually selects the modem
already installed on your system. If you wish to
choose a different modem, select it from the
drop down list, as well as the port you wish to
use. Click the arrow to move to the next step... |
 |
Step
9.
This step will ask you for your local dialup
number; enter it without the area code unless
you have 10-digit dialing in your area.
It will also ask for your Login ID. Your Login
ID is your username plus the @dialup-services.com
realm (example: user@dialup-services.com). Your
login ID MUST be all lowercase letters and have
the @dialup-services.com realm. Click the arrow
to move to the next step... |
 |
Step
10.
This screen asks you if you require a PPP
connect script when you log on. Select no and
click the right arrow to continue... |
 |
Step
11.
This step asks if you if there is a specific
Static IP address for your setup, select No and
click the arrow to continue to the next step... |
 |
Step
12.
This screen asks you for your Domain Name Servers
(DNS). It is recommended that you leave this blank
and your DNS servers will be assigned automatically
when you connect to AITAccess. However, if you are
having difficulties browsing the web once connected,
you can enter the following sets of IP address numbers.
AITAccess.com DNS Server IP’s
208.234.1.33
216.117.131.52
In the Domain Name box you can enter AITAccess.com.
The domain name is optional. Click the right
arrow to move to the next step...
|
 |
Step
13.
This screen asks for your e-mail address and
password. Please enter your e-mail address
(example: johnsmith@fayetteville.net). You must
enter this information in all lower case
letters. Your e-mail password must also be in
all lower-case letters. Click the right arrow to
move to the next step... |
 |
Step
14.
This screen is asking for the incoming (POP3)
and outgoing (SMTP) mail server names. In the
first field, enter just your username, and leave
off @fayetteville.net (example: johnsmith).
In the second field, enter the fayetteville.net
mail host server which is fayetteville.net .
Click the right arrow to move to the next
step... |
 |
Step
15.
This step is looking for the News server name.
You may skip this step. |
 |
Step
16.
This step is asking if you are using a proxy
server. Unless you are using a proxy server, or
if you have no idea what a proxy server is, then
select No and click the right arrow to move to
the next step... |
 |
Step
17.
This is the final step in setting up your
internet connection for AITAccess. Take the
check mark out of "Connect when
finished" and then click on "Go
Ahead" to complete your setup. |
